• Excavator Drill Attchment Drill HC20

    1.  Compared with hydraulic drilling platform, the drilling function is similar and cost-effective.
    2.  The drilling speed of pure rock drilling for hydraulic drilling machine is three times faster than that of the same magnitude pneumatic drill.
    3.  Low energy consumption, about 1/3-1/4 of the same magnitude pneumatic drill.
    4. The long service life of the drilling machine for the hydraulic drill and the less consumption of the drill parts, and the low cost of drilling operation.
    5. The hydraulic drill can adjust the impact energy according to the rock condition to obtain the best drilling effect.
  • EXCAVATOR MOUNTED ROCK DRILL PD-90

    • PD90 Excavator Mounted rock drill suit to the 15-20 tons excavator mounted machines.
    • The rate of the Pump can reach 200L/min, drilling diameter 38-115mm, 3m depth per time drilling.
    • Drilling speed: 1 Meter/Min for hard rock, 1.2 Meter/Min can drill 1m depth for soft rock.
    • Excavator mounted rock drill can use the same type of hydraulic oil pipe line as hydraulic breaker.
    • Drilling control system from Sandvik together with the mechanical rod changer. Anti-jamming design, high efficient, and more reliable ,perfect for quarry and surface mining
  • PD-150 DTH Excavators Drill Attachment(DTH excavator drill rigs)

     High-end configuration: Imported hydraulic valve block.

    All the operations are controlled by the lectrical-controlled appliance. Safe and comfortable for handlers working in the cab.

    Diesel-moving screw compressor mounted in the cab at the rear counterweight, independent drive, strong wind pressure, air volume,

    without digging machine itself affect the system, slag better.

    This machine has low  consumption and high  efficiency.   flexible movement, strong climbing,  wide operation , good working,. 

  • PD-150 Rock Drill Excavators Attachments (DTH)

    Weights/kg 1500
    Size/m 6.0*2.0*1.5
    Maximum operating pressure/MPa 21
    Hole Range/mm 110-155
    Rod Length/mm Φ76-3000
    DTH hammer 45A/55A
    Drilling Depth/m ≤30
    Diesel engine power/kW 131
    Size/mm 3000*1520*1800
    Adapter Excavator ≥15t
  • PD45 Excavator mounted rock drilling attachments

    • PD45 Excavator Mounted rock drill suit to the 15-20 tons excavator mounted machines.
    • The rate of the Pump can reach 200L/min, drilling diameter 45-64mm, 3m depth per time drilling.
    • Drilling speed: 3-5min/m for hard rock, 1min can drill 1m depth for soft rock.
    •  Excavator mounted rock drill can use the same type of hydraulic oil pipe line as hydraulic breaker.
    • It can replace traditional air drill and the air pick, have the advantages of high adaptability, Anti-jamming design, dust collect system, can punch over-sized hole.
  • Rock Drill Attachment for Excavator

    Hydraulic excavator capabilities have expanded far beyond excavation tasks with buckets. With the advent of hydraulic-powered attachments such as a breaker, a grapple or an auger, the excavator is frequently used in many applications other than excavation. Many excavators feature a quick coupler for simplified attachment mounting, increasing the machine’s utilization on the jobsite. Excavators are usually employed together with loaders and bulldozers.

Send this to a friend