Showing 1–12 of 35 results

  • Blast Hole Rock Drilling DTH Drilling Rig

  • Diesel engine(CUMMINS) portable screw air compressor for water well drilling rig

  • Diesel Engine(CUMMINS) Stationary Screw Air Compressor for water well drilling rig

  • DTH90-P Pneumatic DTH Drilling Machine

    • Model: PED65-90B
    • Max. Depth of Drilling: 35-40m
    • Drilling Speed: 6-8m/h
    • Min. Air Pressure: 0.5-0.7Mpa
    • Total Compressed Air consumption: 12-14m3/min
    • Track Travel: 1m
    • Diameter of Drilling: Φ65-90mm
    • Down-The-Hole Hammer: Φ80/90
    • Drilling Direction: Any direction
    • Advance Device: Electric motor, reducer, chain
    • Adjust Height of the Down Jack: 220mm
    • Pneumatic Control Panel: Remote control, manual change direction
    • Total Weight: 400KG

  • Excavator Drill Attchment Drill HC20

    1.  Compared with hydraulic drilling platform, the drilling function is similar and cost-effective.
    2.  The drilling speed of pure rock drilling for hydraulic drilling machine is three times faster than that of the same magnitude pneumatic drill.
    3.  Low energy consumption, about 1/3-1/4 of the same magnitude pneumatic drill.
    4. The long service life of the drilling machine for the hydraulic drill and the less consumption of the drill parts, and the low cost of drilling operation.
    5. The hydraulic drill can adjust the impact energy according to the rock condition to obtain the best drilling effect.

  • Heavy duty compressor air hose pipe clips 3/4

    1.It is oil resistant, heat resistant, aging resistant performance;

    2. Bearing high pressure, pulse superior performance;

    3.The length of hose we can do under your request.

  • Hydraulic Drill Rig QCDZC-90

  • Mobile Rock Drill with 4 hammers

    1. → Rock driller/Hammer: YT29A*4
    2. → Rated Track Length: 2*3m
    3. → Drilling Diameter: Φ34mm~Φ42mm
    4. → Max. Drilling Depth: 6m
    5. → Advance Device: Pneumatic Motor, Chain
    6. → Number of the Hole Hammer: 4
    7. → Total Weight: 1000KG

  • PD-150 DTH Excavators Drill Attachment(DTH excavator drill rigs)

     High-end configuration: Imported hydraulic valve block.

    All the operations are controlled by the lectrical-controlled appliance. Safe and comfortable for handlers working in the cab.

    Diesel-moving screw compressor mounted in the cab at the rear counterweight, independent drive, strong wind pressure, air volume,

    without digging machine itself affect the system, slag better.

    This machine has low  consumption and high  efficiency.   flexible movement, strong climbing,  wide operation , good working,. 

  • PD-90 EXCAVATOR MOUNTED ROCK DRILL

    1)PD90 Excavator Mounted rock drill suit to the 15-20 tons excavator mounted machines.

    2）The rate of the Pump can reach 200L/min, drilling diameter 38-115mm, 3m depth per time drilling.

    3）Drilling speed: 1 Meter/Min for hard rock, 1.2 Meter/Min can drill 1m depth for soft rock.

    4）Excavator mounted rock drill can use the same type of hydraulic oil pipe line as hydraulic breaker.

    5）Drilling control system from Sandvik together with the mechanical rod changer. Anti-jamming design, high efficient, and more reliable ,perfect for quarry and surface mining

  • PD-90B EXCAVATOR MOUNTED DRILLING ATTACHMENT

    1)PD-90B Excavator Mounted rock drill suit to the 15-20 tons excavator mounted machines.

    2）The rate of the Pump can reach 200L/min, drilling diameter 38-115mm, 3m depth per time drilling.

    3）Drilling speed: 1 Meter/Min for hard rock, 1.2 Meter/Min can drill 1m depth for soft rock.

    4）Excavator mounted rock drill can use the same type of hydraulic oil pipe line as hydraulic breaker.

    5）Drilling control system from Sandvik together with the mechanical rod changer. Anti-jamming design, high efficient, and more reliable ,perfect for quarry and surface mining

  • PD-Y28 Excavator Attached Pneumatic Rock Drill

1 2 3

Send this to a friend