DTH Bit-DHD350-152
- Code No.: DHD350-152
- Diameter: 152mm
- Air Holes No.: 2
- Gauge Buttons: 8*17mm
- Face Buttons: 8*14mm
- Face Design: Flat
- Carbide Design: Dome/Semi-ballistic
- Shank Type: DHD
ProDrill rock drilling tools manufacturer produces a various range of DTH hammer bits with DHD shanks type for a wide range of hole sizes, which have been designed to match all conceivable applications for water well industries, mining and construction.
DHD350-152 DTH Hammer Bit
Shank types: DHD3.5, DHD340A, DHD350, DHD360, DHD380.
DTH rock drill bits hole diameter: 3”, 4”, 5”, 6”, 8”(85mm-305mm)
DHD350-152 DTH Hammer Bit
Flat Face
An universal design, especially for hard and abrasive rock formation. Typically, flat face with hemispherical buttons design is the most popular choice. This kind of face shape is suitable for hard to very hard and abrasive rock formations in application with high air pressure. Good penetration rates an resistance to steel wash.
Dome/Hemispherical Buttons
Universal buttons for all rock formation, best suited to hardest and very abrasive rock formation.
Semi-Ballistic/Parabolic Buttons
Excellent penetration rate, but only suited to medium hard and not so very abrasive rock formation.
DHD350-152 DTH Hammer Bit DHD350-152 DTH Hammer BitDHD350-152 DTH Hammer Bit
DHD shank DTH drill bit with flat face, 8 dome & 8 semi-ballistic carbide buttons for blasting bore holes, water well drilling.
DTH hammer bit with foot valve.
PDFFor more details please watch PDF online: DTH hammer bits with DHD shanks Catalogue
Related products
-
DHD3.5-90 DTH Hammer Bit
DTH Drill Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance.
DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. -
S1-32-722-67 Tapered Cross Bit
- Code No.: S1-32-722-67
- Diameter: 32mm
- Length: 67mm
- Tapered Degree: 7°
- Carbide Dimension: 12mm*8mm
- Water Holes: 1 on front, 2 on side
Premium designs and steel and premium tungsten carbide insert grade T6 supplied by Boart Long year , tungsten carbide code No. YK05 supplied by Zhuzhou 601 factory , Offers industry-leading strength and penetration rates for more productivity. Excellent straightness and hole clean quality ,Get max . drilling performance.
-
Tapered Drill Rods (Forged Collar Tapper Rods )
Carburization is a process used to harden the entire rod surface both internally and externally to strengthen and extend the life of tapered drill rod.
