Focus on rock drilling, it is more energy efficient, and you can enjoy different open-air drilling rigs.

Atlas Copco open-pit rock drilling rigs are available in FlexiROC, PowerROC, SmartROC, AirROC, etc., for aggregate quarry and limestone quarry, open pit mining and mining, construction and other areas.

 

The Atlas Copco FlexiROC T15 R is the smallest hydraulic top hammer drill in the series. It does not have a cab. It is a four-wheel drive skid steering device with full wireless remote control. It must be cool!

The rig weighs less than 3 tons and is easy to transport. The diameter of the drill hole is 27mm-51mm. Various rock drills with different shank tails are available to meet various application requirements. It can use SR32 drills and the largest drill. With a hole depth of 9 meters, it can be used in foundation drilling, trench excavation, and secondary blasting.
It is ideal for small construction projects, rock reinforcement and lone stone blasting and is widely used in the material industry. It is a fully wireless four-wheel drive device. Excellent drilling performance and walking stability.

The FlexiROC T20R also has no cab and relies on wireless remote control. It uses a COP1435 rock drill with a diameter of 38mm – 64mm and a maximum drilling depth of 12m. It is suitable for trench excavation, foundation drilling and underground work.

This is the FlexiROC T30 R building version, equipped with a COP1640+ rock drill, with a boom radius of 5300mmm, a bore diameter of 48mm-89mm and a maximum drilling depth of 15m.

The FlexiROC T30 R also has a mining version with a drill diameter of 45mm-89mm and a maximum drilling depth of 17.5m, which is suitable for construction and small quarry work.

With a cab, the FlexiROC T35 is a flexible, versatile top hammer rig with a COP 1840+ or COP 2540+ rock drill. Suitable for working in medium-sized quarries with a diameter of 64mm-115mm and a maximum drilling depth of 28m.

The FlexiROC T45’s more capable top hammer rig can be equipped with a COP 2560+ or COP 3060 rock drill with a maximum drilling depth of 35 meters.

Looking at several PowerROC series rigs, the first thing to see is the D45, with a diameter of 90mm-130mm and a maximum drilling depth of 21 meters. Work in limestone and cement raw quarry, open pit mines and aggregate quarries.

The PowerROC D55 is more powerful than the D45. It uses Atlas Copco down-the-hole hammers. It is available in three rock drills, COP 34, COP 44 and COP 54. The maximum drilling depth can reach 30 meters.

The PowerROC T25DC, which works at night, is beautiful, equipped with the new RD 14S rock drill and high-displacement air compressor for efficient power and excellent drilling speed. The maximum drilling depth can reach 18.3 meters.

The PowerROC T35 top hammer rig is equipped with the COP1840+ series of rock drills with powerful drilling capabilities for a maximum drilling depth of 25 meters.

The PowerROC T50 is a COP 3060 rock drill with a bore diameter of 102mm-152mm and a maximum drilling depth of 35 meters.

The Atlas Copco SmartROC series is divided into several models with different working capacities. The SmartROC C50 is a COP 3060 CR rock drill with a bore diameter of 90mm-140mm and a maximum drilling depth of 36 meters.

The SmartROC D60 features rugged propulsion beams and built-in sensors in the drill rod handling cylinder and the rod motor. The largest drilling depth is 45 meters.

The SmartROC D65 DTH rig features a hole navigation system (HNS) to minimize non-drilling time. The drilling diameter is 110mm-203mm and the maximum drilling depth is 55.5m, which is suitable for large mines and quarries.

This is the SmartROC T35 top hammer drill with a maximum drilling depth of 28 meters.

SmartROC T40 top hammer drill with a diameter of 76mm-127mm and a maximum drilling depth of 28 meters.

Finally, you can saw the SmartROC T45 top hammer drill, which can be equipped with a COP 2560+ or COP 3060 rock drill with a maximum drilling depth of 35 meters.